Glossary entry (derived from question below)
Russian term or phrase:
ВОИ
English translation:
visual inspection and measurement
Added to glossary by
Svetlana Melikyan
Jun 14, 2021 06:27
2 yrs ago
21 viewers *
Russian term
ВОИ
Russian to English
Tech/Engineering
Chemistry; Chem Sci/Eng
Аппараты, работающие под давлением: методы контроля
Proposed translations
(English)
3 +3 | visual inspection and measurement | mk_lab |
Proposed translations
+3
1 hr
Selected
visual inspection and measurement
ВОИ = визуальный осмотр и измерение (сварного соединения) = visual inspection and measurement
Визуальный осмотр и измерения - Правила ...
https://ozlib.com › vizualnyy_osmotr_izmereniya
Вопрос. Каковы цели визуального осмотра и измерений сварных соединений?
Ответ. Визуальному осмотру и измерениям подлежат все сварные соединения ...
Non destructive testing of welds
https://www.ndt.com.ua/en/applications/welds-testing
This method combines a visual inspection and measurement of the geometrical parameters of welds to check their compliance with the required values. Before testing, the welds should be cleaned from scale, slag and metal splashes. After that, the surface should be treated with alcohol, or etched using a 10% solution of nitric acid. As a tool for this type of testing, a 5 or 10-power magnifier, as well as lighting devices and measuring instruments (ruler, calipers, templates) are normally used to verify both the weld and defect sizes.
Визуальный осмотр и измерения - Правила ...
https://ozlib.com › vizualnyy_osmotr_izmereniya
Вопрос. Каковы цели визуального осмотра и измерений сварных соединений?
Ответ. Визуальному осмотру и измерениям подлежат все сварные соединения ...
Non destructive testing of welds
https://www.ndt.com.ua/en/applications/welds-testing
This method combines a visual inspection and measurement of the geometrical parameters of welds to check their compliance with the required values. Before testing, the welds should be cleaned from scale, slag and metal splashes. After that, the surface should be treated with alcohol, or etched using a 10% solution of nitric acid. As a tool for this type of testing, a 5 or 10-power magnifier, as well as lighting devices and measuring instruments (ruler, calipers, templates) are normally used to verify both the weld and defect sizes.
Note from asker:
Спасибо! |
4 KudoZ points awarded for this answer.
Something went wrong...