This site uses cookies. Some of these cookies are essential to the operation of the site, while others help to improve your experience by providing insights into how the site is being used. For more information, please see the ProZ.com privacy policy.
Cookie settings
  1. KudoZ™ Top
  2. polski > angielski
  3. Budownictwo/inżynieria lądowa i wodna

puszki na zawiasy

angielski translation: (drill a flat-bottomed hole for the) hinge cup

WPIS DO GLOSARIUSZA (NA PODSTAWIE PYTAŃ PONIŻEJ)
Termin lub wyrażenie (polski):  puszki na zawiasy
Tłumaczenie (angielski):  (drill a flat-bottomed hole for the) hinge cup
Autor wpisu: Frank Szmulowicz, Ph. D.

11:52 May 15, 2020
Tłumaczenia polski – angielski [PRO]
Tech/Engineering - Budownictwo/inżynieria lądowa i wodna
Termin lub wyrażenie (polski):   puszki na zawiasy
W płycie G-K wyciąć otwory pod puszki zawiasów.
HelenaWu
Local time: 03:35
(drill a flat-bottomed hole for the) hinge cup
Objaśnienie:
To drill the flat-bottomed hole for the cup, you'll need a 35-millimeter Forstner bit. Mark a depth line ½ inch up the side of the bit, position it on the center point, and bore into the door until you hit the line

Install The Hinge Cups
https://www.thisoldhouse.com/cabinets/21016567/how-to-instal...


WHAT IS A HINGE CUP?
Hinge CupA hinge cup refers to a recession that is required for setting certain styles of invisible hinges. Hinge cup, cup hinge, Euro Hinge and invisible hinge are all terms that are commonly used interchangeably despite a few subtle differences. A hinge cup is one part of the invisible hinge that, along with the arm, makes up the movable half of a door mechanism. The complimentary piece to a hinge cup is called a mounting plate.

When setting the hinge cup, it is important to decide if the cabinet door is to have a profiled edge. If so then be sure that the router bit does not cut into the cups circumference. The hole drilled to set the hinge cup should be a flat-bottom hole drilled into the back of the cabinet door, and it is equally important to be certain that this drilling will not break through to the beveled edge of the door. The location and the depth of the hole will have some variance from brand to brand, but the diameter is generally 35mm.
https://kitchencabinetkings.com/glossary/hinge-cup/
Autor wybranej odpowiedzi:

Frank Szmulowicz, Ph. D.
USA
Local time: 21:35
Grading comment
Liczba punktów KudoZ przyznanych tej odpowiedzi: 4



Zestawienie nadesłanych odpowiedzi
3 +1(drill a flat-bottomed hole for the) hinge cup
Frank Szmulowicz, Ph. D.


Głosy w dyskusji: 2





  

Odpowiedzi


  7 min   stopień pewności: Answerer confidence 3/5Answerer confidence 3/5 opinia (wypadkowa): +1
(drill a flat-bottomed hole for the) hinge cup


Objaśnienie:
To drill the flat-bottomed hole for the cup, you'll need a 35-millimeter Forstner bit. Mark a depth line ½ inch up the side of the bit, position it on the center point, and bore into the door until you hit the line

Install The Hinge Cups
https://www.thisoldhouse.com/cabinets/21016567/how-to-instal...


WHAT IS A HINGE CUP?
Hinge CupA hinge cup refers to a recession that is required for setting certain styles of invisible hinges. Hinge cup, cup hinge, Euro Hinge and invisible hinge are all terms that are commonly used interchangeably despite a few subtle differences. A hinge cup is one part of the invisible hinge that, along with the arm, makes up the movable half of a door mechanism. The complimentary piece to a hinge cup is called a mounting plate.

When setting the hinge cup, it is important to decide if the cabinet door is to have a profiled edge. If so then be sure that the router bit does not cut into the cups circumference. The hole drilled to set the hinge cup should be a flat-bottom hole drilled into the back of the cabinet door, and it is equally important to be certain that this drilling will not break through to the beveled edge of the door. The location and the depth of the hole will have some variance from brand to brand, but the diameter is generally 35mm.
https://kitchencabinetkings.com/glossary/hinge-cup/

Frank Szmulowicz, Ph. D.
USA
Local time: 21:35
Pracuje w dziedzinie
Język ojczysty: angielski, polski
Punktów PRO w kategorii: 1299

Opinie dotyczące tej odpowiedzi (oraz komentarze odpowiadającego)
pozytywna  Michael Grabczan-Grabowski
  6 godz.
  -> Thank you, Michael.
Login to enter a peer comment (or grade)



Login or register (free and only takes a few minutes) to participate in this question.

You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.

Return to KudoZ list

KudoZ™ translation help

Pytania KudoZ pomagają w nawiązywaniu kontaktów pomiędzy tłumaczami i innymi osobami, służących wzajemnej pomocy w tłumaczeniu czy wyjaśnianiu znaczenia terminów i krótkich wyrażeń.

See also:
ProZ.com term search
Search millions of term translations
Close search
Term search
  • All of ProZ.com
  • Szukaj terminu
  • Praca
  • Forum
  • Multiple search